contact us Contact us
contact number: 010-82482526/27/28
company address: 北京市海淀区马连洼北路8号万霖科技大厦B座709室

scan it Get more details
Home >>  Product Center

NGT-075-B


NGT-075-B gamma tools are the smallest diameter scintillator gamma tools available on the market today. With an outside diameter of only 0.75” they are ideally suited for mounting within the drill-collar wall to make superior directional gamma sensors. We offer two versions of the NGT-075-B with various protection options for the tool and its electronics. Magnetic materials are kept to an absolute minimum to limit interference with closely mounted magnetometers.
Product Details

NGT-075-B Gamma Tools (.075” OD)

NGT-075-B
(w/ Molded Electronic
s Protection)   P/N 204-200-000

The latest version of the NGT-075-B contains our new Molded Electronics Protection optimized for extreme drilling environments. Pre-molded pads cover and protect the top and bottom of the circuit boards, replacing the traditional protective silicone mixture poured over the boards. This new encapsulation method of the circuit boards improves reliability by dispatching excessive heat and minimizes the impact of shock and vibration to the electronics. The molded pads also improve serviceability by allowing easy removal to provide access to the electronics for inspection and repair.


NGT-075-B
(w/ Encapsulation Sleeve) P/N 204-400-000

CBG’s Encapsulation Sleeve is offered as an alternative to traditional collar mounting methods that may be less effective at protecting gamma tools in harsh drilling environments. Our molded encapsulation sleeve insulates the entire NGT-075-B tool, including its electronics. It reduces shock and vibration by 50% on the NGT-075-B when mounted in a collar. The pre-molded sleeve consists of two pieces that are approximately 1.0” OD when assembled around the .075” gamma tool. Ribbing on the outside of the sleeve provides gripping and allows for thermal expansion. The inside of the sleeve contains precisely molded impressions of the top and bottom of the circuit boards for electronics protection.

                                                          NGT-075-B Specifications



P/N 204-200-000P/N 204-400-000
Detector Scintillator CrystalSodium Iodide, Na(TI)Sodium Iodide, Na(TI)
PhotomultiplierR4177A (Hamamatsu)R4177A (Hamamatsu)
MechanicalDiameter (OD)0.75”1.003″ (Sleeve)*
Length (make-up)13.7”14.215″ (Sleeve)**
Weight8.4 oz.8.4 oz.
End ConnectorsFlying lead (Power, GND, Output)Flying lead (Power, GND, Output)
MaterialAluminum AlloyAluminum Alloy
PerformanceSensitivity.76 CPS/API.76 CPS/API
Accuracy+/- 5% to 150°C
+/- 10% to 175°C
+/- 5% to 150°C
+/- 10% to 175°C
EnvironmentalOperating Temperature-18°C to 175°C-18°C to 175°C
Survival Temperature (reduced accuracy)-40°C to 200°C-40°C to 200°C
Heat/Cool Rate, Max.2.8°C (5°F) per minute2.8°C (5°F) per minute
Vibration (3 axis) 50-1000Hz, Random20G (14G RMS)25G (18G RMS)
Shock (3 axis)500G, 0.5ms, half-sine500G, 0.5ms, half-sine
Power RequirementsDC Input Voltage17-48 VDC, 50VDC Max.17-48 VDC, 50VDC Max.
Tool Current8-11 mA8-11 mA
Output SignalNegative Pulse+5V to GND, 5 uSec width+5V to GND, 5 uSec width